Sandals

The outside is cowhide and the inside is lambskin. RECTO's Strapy Buckle Sandal (Black) uses 100% cowhide for the outer upper, and is lined with 100% lambskin on the inner lining that wraps the foot.

POST ARCHIVE FACTION's Breath Slides are filled with 100% cowhide, from the inner lining that touches the foot to the sole that touches the ground. Leather from the German Heinen tannery, which opened in 1891, is used, and perforation decorations in soft curved shapes are added to the instep area. In general, cowhide soles have excellent breathability and the characteristic of becoming flexible to match the wearer's foot shape as they walk.

Full-grain refers to leather that preserves its original grain without shaving off or artificially covering the outermost surface of the leather. Because the pores and fibrous structure of the surface layer remain intact, it is tough in durability and has good breathability and flexibility.

To give the numbers first, it is 1–3cm. Garments that have undergone washing, such as Washed Loose Fit Sweatpants, can have size deviations of this amount, and because this stems from the process, it is not considered grounds for a refund or exchange. Since the unit in the size chart is also cm, you can understand that there is this range of variation between the values written in the chart and the garment you actually receive.

A brad fastener is decorative hardware that is fixed by passing it through a hole and spreading the thin legs extending from the back to both sides. It is commonly used in stationery with the same structure as a split pin used to bind paper.

The first part that catches the eye on PIETON's LINZ string sandals_white/blue is the instep. For the strings, which are thickly woven with a round cross section, subtly glossy cow leather is used.

The outside is textured wool fabric, and the inside is smooth cow leather. FARO slingback sandals_navy wool by PIETON uses a 100% wool fabric in a twill weave with diagonal grain for the upper, which is the shoe's exterior. On the other hand, cow leather is used for the lining wrapping the inside of the instep and for the insole touched by the sole of the foot.

Match your foot length to your regular size, and choose a snug fit for the width and room that wrap around your foot. Blanc Sur Blanc's genuine leather straps stretch naturally with wear to fit your feet comfortably. In general, genuine leather tends to have its leather structure become gradually more flexible according to body temperature and walking habits. If you choose a loose size from the beginning, the shoes may become too loose after the leather stretches, causing your feet to slip inside.

The entire interior of the shoe is leather. Blanc Sur Blanc finishes everything, including the lining and the insole touching the sole of the foot, with selected leather, providing good air circulation and minimal stuffiness.

A rubber sole refers to a component in which the outsole that touches the bottom of the shoe is made of rubber material.

The outside is cow leather or lambskin, and the inside is pigskin. Depending on the model, Blanc Sur Blanc uses Cow Leather or Lamb Skin for the upper material, while commonly applying Pig Skin to the lining that wraps around the foot. Carefully selected leather is used not only for the lining but also for the insole area that touches the sole of the foot.

Online is for fitting your foot measurements, and offline is for altering the shoe's appearance. To produce shoes with changes to material, color, or heel outside of the basic specifications designated by Blanc Sur Blanc, you must visit an offline store. This is because it is safer to adjust the shape of the shoe heel or fabric texture while seeing the actual item in person.