Belts

Lizard pattern calfskin

A lizard pattern is embossed on the surface of Italian calfskin to capture the leather's unique grain.

Square buckle and engraved logo

Fitted with the brand's signature square buckle, with a logo engraved in the bottom center.

Adjustable 1.9 width specification

With a width of 1.9 and a horizontal length of 109, the length can be adjusted to fit your body type.

Fabric combining six yarns

Crafted by blending polyester, rayon, lyocell, wool, polyurethane, and nylon.

100% TPU garter belt

100% TPU material is used for the garter belt accessory that comes with the skirt.

Cut design considering movement

Constructed so that bodily movement is not restricted while preserving the bold cut and dramatic silhouette.

Oval buckle and engraved logo

It applies an oval buckle that freshly resolves the round buckle. The logo is engraved in the lower center of the buckle.

Strap dimensions of 1.9cm width

Crafted with a slim strap 1.9cm in width. You can adjust the size to fit your body using the punctured holes.

Cowhide and zinc materials

100% cowhide is used for the strap, and the buckle is made of zinc.

Vera Pelle-certified cowhide

Full-grain vegetable-tanned cowhide leather certified by Italy's Vera Pelle Association is treated with aniline dye.

Side edge coat finish

Finished neatly with a side edge coat along the side edges.

Zinc hardware and standard specifications

Made using 100% zinc for the metal hardware, with a length of 110cm including the buckle and a width of 3cm.

Seashell-curved buckle

A shell buckle inspired by the curves of a seashell is attached to the tip, and the logo is engraved in the center of the bottom of the buckle.

Cowhide and zinc materials

Made in Korea by combining a cowhide strap with a zinc buckle.

1.9cm width and adjustable structure

Sized at 1.9cm wide and 111cm long, the circumference can be adjusted to fit your body type.

Vera Pelle-certified cowhide

Full-grain vegetable-tanned cowhide certified by Italy's Vera Pelle Association is treated with aniline dyeing to capture its original character.

Surface texture and edge coat finish

The inherent surface of the leather is preserved to produce a natural texture, while the sides are neatly encased in side edge coat.

100% zinc metal hardware

The hardware, including the buckle, is made of 100% zinc, joining securely.

Color that changes with use

Natural Italian cowhide leather was used. With the dark brown leather, a two-tone color naturally reveals itself depending on signs of use.

Vintage nickel buckle

The subtly textured nickel-plated buckle matches calmly with the dark brown leather.

Dimensions that fit pant belt loops

Based on OS, it measures 2.8cm in height and 105cm in length, fitting stably into pant belt loops.

Interwoven braided structure and round buckle

A round signature buckle accent is added to the woven body crafted by densely braiding cords.

Synthetic materials and metal hardware

The body is woven from a half-and-half blend of polyester and polyurethane, and zinc hardware is applied to the buckle.

Length and flexible circumference adjustment

Because the buckle can be fastened anywhere between the woven gaps, the circumference can be adjusted freely without fixed holes.

Asymmetrical pocket configuration

The appearances of the two back pockets are configured differently from each other. By varying the left and right shapes, a subtle difference was given to the back silhouette.

Blended material with added stretch

A fabric blending polyester 70%, rayon 27%, and span 3% was used. By adding stretch, there is little hindrance when moving your legs.

Waistline finishing details

It was tidily finished by setting a waistband line at the waist and adding bartack details. By firmly fastening the waistline, it neatly holds the trousers' trim appearance.