Shoes

Two-way construction to fold up or down

You can wear them with the upper ankle collar pulled straight up, or fold it outward to reveal the dark brown wool fur on the inside.

Vibram sole and Ortholite insole

The sole is constructed with a 100% rubber Vibram outsole and an Ortholite insole.

Matte cow leather and wool brushed fleece lining

A matte cowhide outer is lined with a brushed fleece blend of wool and polyester.

Two types of leather

The upper is cowhide and the lining is sheepskin.

50mm heel

The heel height is 50mm.

Options tailored to your feet

Based on true to size, if your foot width is narrow or your feet are lean, you can choose a half size down. Foot width widening and instep height raising can also be custom-made as options.

Cowhide upper and sheepskin lining

Cowhide is used for the upper, and it is lined with sheepskin.

50mm heel height

Crafted with a heel height of 50mm.

Custom foot-fit options

Foot width and instep height can be custom-adjusted, and changes to heel height or boot circumference are also possible.

Adjusting the length by folding or unfolding

You can style them differently at your desired length by unfolding the top shaft upwards or folding it downwards.

Asymmetrical belt detail

Asymmetrical belt straps are placed to wrap around the ankle, firmly securing the fit.

Stable heel and outsole

With a 1cm front and 3.5cm rear heel paired with a slip-resistant rubber outsole, you can walk comfortably.

Natural rubber outsole

The outsole in contact with the ground is made of natural rubber material.

Strap construction that holds the foot

The instep rope straps, Velcro, and heel strap hold the foot so it does not wobble.

Light single-shoe weight

With a single-shoe weight of 209g based on size 250, it eases the burden on the feet.

Cowhide upper and lambskin lining

The upper is made of cowhide, and the lining is layered with lambskin. It is crafted using natural leather all the way to the interior that touches the foot.

50mm heel

With a heel height set at 50mm, you can walk stably.

Personal custom-made

In addition to foot width and instep adjustments, it can be custom-made to your feet including special sizing, leather types, heel height, and boot circumference.

Cowhide upper and sheepskin lining

Cowhide is used for the outer material, and sheepskin lines the inside.

50mm heel height

The heel is made to a specification of 50mm in height from the ground.

Foot shape customization options

Custom-made production is available by selecting foot width widening and instep height raising options.

Suede lambskin material

Made with lambskin fabric treated with a soft suede finish to bring out a flexible texture.

Sleek pointed toe and 6cm heel

Combines a sharp pointed toe with a 6cm heel to create a refined line.

Knee-high boots with ribbon details

Reaching just below the knee, ribbon details are placed along the height to create a delicate style.

Nappa lambskin and cowhide lining

Nappa lambskin is used for the upper, and cowhide lines the lining and insole where your foot touches.

Hand-stitched driving sole

Full-grain kipskin and a TR material outsole are joined together by hand-stitching.

Rear banding and detachable insole

Banding is inserted at the heel to make them easy to put on and take off, and a removable insole that can be taken out is included.

Lambskin suede and sheepskin

Lambskin suede is used for the upper, and sheepskin lines the interior.

50mm heel

With the heel height set to 50mm, you can walk with ease.

Custom foot width and instep options

Options for widening the foot width and raising the instep are provided so you can wear them tailored to your feet.

Sheepskin upper and lining

Lambskin suede is used for the upper, and sheepskin is also applied to the lining.

50mm heel height

The heel height is set at 50mm, made so that it is neither excessively low nor high.

Foot fitting and custom support

You can select foot width widening and instep heightening options, and changing the leather or heel height is also possible.

Nappa lambskin upper

Soft nappa lambskin is used on the exterior, and natural cowhide is lined on the lining and insole that directly touch the foot.

Combined outsole and removable insole

Equipped with a driving outsole combining full-grain kipskin and TR material, and the insole can be removed for pleasant care.

Toe lace-up and rear banding

Leather laces extend near the toe so they can be tightened to fit the width of the foot, and rear heel banding flexibly holds the heel.

Washed and cracked texture

Sand washing and cracked texture are applied to the surface, creating a naturally faded, stylish look.

8cm block heel and rubber outsole

A rubber combat outsole is added beneath the 8cm block heel to support your steps.

Buckle straps and folded styling

You can adjust the width with two buckle straps, and change the height of the boots by folding down the back slit.

Pointed toe and 6cm heel

Adding a 6cm block heel to the sleek pointed-toe line creates a well-balanced height.

Ankle buckle strap

Buckle and strap decorations wrap along the ankle line to reduce monotony.

Side zipper closure

A zipper on the side allows you to easily open, close, and take off the boots.