Boots

A top shaft styled in two ways

You can wear them pulled straight up to below the knee, or fold the top shaft down to reveal the dark brown wool shearling on the outside.

Vibram outsole and OrthoLite insole

Supported by a thick Vibram outsole, with an OrthoLite insole added inside.

Cowhide outer and wool-blend lining

The matte cowhide outer is lined on the inside with a brushed lining blending wool and polyester.

An approximately 5cm-high wedge heel

Applying a wedge heel with a wide ground contact area ensures comfortable, shake-free walking.

A last with a square toe

An in-house developed last emphasizes an angular feel instead of a pointed line, neatly refining the toe line.

Shirring detail on the upper

Natural wrinkle details are added to the upper to create a surface texture that is not plain.

Rounded cylindrical heel

A round, column-shaped heel is set straight beneath the sole.

Lambskin used inside and out

Crafted with lambskin material wrapping both the upper and the lining.

Italian leather sole

The sole uses an Italian material combining cowhide and polyurethane.

Two-way construction to fold up or down

You can wear them with the upper ankle collar pulled straight up, or fold it outward to reveal the dark brown wool fur on the inside.

Vibram sole and Ortholite insole

The sole is constructed with a 100% rubber Vibram outsole and an Ortholite insole.

Matte cow leather and wool brushed fleece lining

A matte cowhide outer is lined with a brushed fleece blend of wool and polyester.

Suede Material and Processing

Crafted from hairy cowhide suede that has undergone chrome tanning. Vintage post-processing has been added to the lower upper and the sole, giving it a unique texture.

Snap-Method Top Adjustment

A YKK snap button is applied to the upper part. Depending on the button fastening position, you can adjust the ankle circumference measurement to fit properly.

Front and Back Curved Cuts

Curved cuts are incorporated into the front and back of the shoe. Cut lines are arranged in flowing curves instead of straight lines.

Application of Vibram rugged sole

By combining Vibram's rugged sole onto the outsole, it stably supports the ground.

Domestic handmade production

As a THREE TO EIGHTY shoes line, they are directly crafted by hand domestically.

Cowhide outer shell construction

Natural cowhide is applied as the upper material, and synthetic leather lines the inside.

Full-grain kipskin and cowhide lining

Full-grain kipskin is used for the upper, and cowhide lines both the interior and the insole. It envelops the entire foot in soft leather.

Detachable removable insole

The inner insole can be easily taken out as needed, making it easy to care for after wearing.

A 2.5cm heel from the 10th anniversary collection

This product is part of the Seoul collection celebrating Cueren's 10th anniversary. A low 2.5cm heel is added to reduce the burden when walking.

Chrome-tanned cowhide suede

Chrome-tanned genuine cowhide that preserves its surface grain is used for the upper. It features a napped surface texture.

Circumference adjustment via snaps

YKK snaps are placed on the upper section so the ankle circumference can be adjusted. You can tighten or loosen the ankle to suit the leg width of your pants.

Finishing on the lower upper and sole

A vintage processing treatment has been added to the lower portion of the upper and the outsole. It gives the impression of natural wear and tear.

Fold-down structure and adjustable buckles

The top buckle lets you adjust the opening tightness, and the top can be folded downward to wear in a different way.

Cowhide upper and rubber outsole

Cowhide is used for the upper, and a rubber outsole designed with traction in mind is applied to the bottom surface.

21cm length and 3cm heel

With a back length of 21cm, it wraps above the ankle, and the 3cm height heel places little strain when walking.

Nappa lambskin upper

Premium nappa lambskin is used for the upper material.

Natural leather lining and insole

The lining is wrapped in natural cowhide, and leather material is also applied to the insole.

Removable insole structure

The insole can be taken out of the shoe, making it easy to care for by removing and drying it after wear.

Side multi-buckles

You can adjust the length of the buckles placed along the side of the boots yourself to fit your leg circumference.

Foldable styling

You can undo the top buckle and fold the upper section downward to wear them in a shorter length style.

Cowhide and fake fur

Made with black natural cowhide leather uppers surrounded by charcoal-toned fake fur trimming.

Nappa lambskin and cowhide lining

Premium nappa lambskin is used for the upper, while natural cowhide is applied to the lining and insole that touch the foot. It softly wraps around the entire foot for a comfortable fit.

Removable insole

Designed with a structure where the insole inside the shoe can be taken out and separated. It is easy to take out the insole separately for care, allowing you to keep it fresh.

4cm heel and molded outsole

Equipped with a 4cm high heel on a synthetic rubber TR molded outsole. It provides a moderate height while letting you step stably on the ground.

Cowhide upper and rubber outsole

The upper is made of cowhide, and a synthetic rubber outsole is applied to the bottom.

Cutline fur trimming and lace-up

Fur trimming runs along the cutlines, and a criss-cross lace-up detail is added to the heel counter.

Foldable top structure

The lining extends to the tips of the toes, and the upper section can be folded down outward when worn.

Nappa-processed lambskin upper

Nappa-processed lambskin is used for the outer material.

4cm heel and molded outsole

A 4cm heel is combined with a lightweight synthetic rubber molded outsole that helps prevent slipping.

Removable cowhide insole

Care is easy because the natural cowhide insole can be taken out and dried after wearing.

Foldable design to wear folded down

When you unfasten the top buckle and fold the upper part down, the inner fur lining is exposed to the outside. You can alternate between wearing them in the basic style with the shaft standing up and wearing them folded down.

Fake fur lining and insole

Fake fur lines the overall interior lining and the bottom insole of the shoes. The surface touching your entire foot is cozy, reducing the chill even on cold days.

35cm length and 3.5cm heel

Based on size 250, the back length is 35cm, stably wrapping around the calf. The back heel height is 3.5cm and the front sole is 1.2cm, allowing you to walk comfortably without strain.

Cowhide and fox fur upper

Crafted using cowhide and fox fur together on the upper.

Sheepskin lining and 50mm heel

Lined with soft sheepskin and set on a 50mm high heel.

Custom options for foot width and instep

Equipped with custom production options for widening the foot width and raising the instep, allowing you to choose according to your foot shape.

Engineer boots collaborated on by two brands

KHIHO and Misekiseoul planned this together, interpreting it based on traditional engineer boot styles.

Buckle straps and manual aging

Multiple straps and wrinkles have been added, and hand-aging processing has been performed, giving each piece a unique color tone and texture.

Fold-down styling structure

When you flip the front part down and fold it, the hidden collaboration logo is revealed to the outside.