Sneakers

Beige-exclusive cut-off frayed finish

A finishing method where the edges of the panels are naturally unraveled, applied exclusively to the beige colorway this season.

Metal eyelets and split outsole

Metal eyelet details are added to the toe cap, and the sole is designed with a split structure.

Polyester and cotton blend upper

The upper is woven from a blend of polyester 75% and cotton 25%, with a rubber outsole applied to the bottom.

Detachable charm ornaments

The bloom charms, two on each shoe, can be freely detached or attached according to preference.

Combination of cowhide and check fabric

Accented with check fabric composed of 50% wool and 50% polyester on the cowhide upper, adding a unique texture.

Low heel and rubber outsole

Encompassed with a low 1.5cm heel and a rubber material outsole, making stable contact with the ground.

Nappa lambskin and cowhide lining

Nappa lambskin is used for the upper, and cowhide lines the lining and insole where your foot touches.

Hand-stitched driving sole

Full-grain kipskin and a TR material outsole are joined together by hand-stitching.

Rear banding and detachable insole

Banding is inserted at the heel to make them easy to put on and take off, and a removable insole that can be taken out is included.

Upper wrapped in a single piece

A single piece of lambskin wraps the entire upper without cut lines.

Laces to the toe and heel pleats

Thin shoelaces are placed all the way to the tip of the toe, and shirring pleats are gathered at the heel.

Vibram rubber outsole

Finished with a 2cm-high Newflex Vibram outsole, made of 100% rubber.

Nappa lambskin and cowhide lining

Soft nappa lambskin is used for the upper, and cowhide is applied to the lining and insole, wrapping the interior in natural leather as well.

Hand-stitched driving sole

The outsole, which combines lambskin and TR material, is crafted by hand-stitching them together.

Removable insole

You can take the insole out from inside the shoe to care for it separately.

Nappa lambskin upper

Soft nappa lambskin is used on the exterior, and natural cowhide is lined on the lining and insole that directly touch the foot.

Combined outsole and removable insole

Equipped with a driving outsole combining full-grain kipskin and TR material, and the insole can be removed for pleasant care.

Toe lace-up and rear banding

Leather laces extend near the toe so they can be tightened to fit the width of the foot, and rear heel banding flexibly holds the heel.

Lace-up extending to the toe

The shoelaces extend long down near the toe, and elastic banding is added to the heel.

Lambskin and cowhide composition

Nappa lambskin is used for the upper and shoelaces, and natural cowhide wraps the lining and insole.

Removable insole

The insole inside the shoe can be taken outside, making it easy to care for separately.