Jumpers

High-neck collar wrapping the neck

The high-rising collar cozily covers the neck, and the roomy body and sleeves prevent pinching even when layering multiple pieces.

Zipper closure and diagonal pockets

Featuring a front zipper for easy opening and closing, and diagonally placed pockets allow hands to slip in naturally.

Hem string and sleeve adjustment tabs

By pulling the hem string and sleeve tabs to adjust the circumference, you can block cold winds and directly regulate the garment's volume.

Knit balaclava wearable on its own

It can be detached using the buttons inside the neckline, making it great to wear wrapped together with the outer garment or taken off to wear on its own.

Shirred banding on pockets and hem

The out-pocket openings, sleeves, and hem are finished with shirred banding to maintain the garment's shape and prevent cold air from seeping in.

Use of polyester filling

Filled with 100% polyester padding on the inside, it can be worn lightly and warmly.

Filling with a higher down cluster ratio

Filled with goose down filling at a ratio of 90% down and 10% feather, it is light and warm compared to its volume.

Double closure with zipper and buttons

Arranging a placket and military slot buttons together over the two-way zipper blocks the wind blowing through gaps in the front opening.

Adjustable strings and stoppers

Pulling the strings and stoppers provided at the hood and hem narrows the garment circumference, allowing you to adjust the fit so cold air does not enter.

Turkish lambskin

One hundred percent Turkish lambskin is used throughout the shell, making it flexible and soft.

Lampo zipper

An Italian Lampo zipper detail is applied to the front closure for a clean fastening.

Red contrast lining

One hundred percent cupro material is used throughout the lining, accented with a red color contrast.

90/10 goose down filling

Filled with goose down in a ratio of 90% down and 10% feathers to provide warmth relative to its weight.

Double closure structure

A placket with slotted buttons covers the two-way zipper to block wind coming through the front.

Adjustment strings and sleeve ribs

Tightening the stopper strings on the hood and hem while wrapping the inner cuffs helps keep warmth from escaping outside.

Diamond quilting pattern

Filled evenly with 100% polyester padding in a diamond grid, it maintains light volume without clumping.

Double collar and composite closure

By raising the double stand collar and closing the two-way zipper and military slotted button placket, it layers protection against the cold air.

Binding finish and hem adjustment

The garment edges and cut lines are wrapped with binding for durability, and the hem width can be adjusted with the drawstring and stopper.

Goose down 90/10 filling

Filled with goose down in a ratio of 90% down clusters and 10% feathers, it is light and warm.

Hood zipper slit

A zippered slit is placed in the center of the hood, allowing it to be opened and closed depending on the situation.

Sleeve and hem adjustment structures

The snap buttons on the cuffs and string stoppers at the hem are used to adjust the fit and width.

Suede-textured faux leather

By blending 90% polyester and 10% polyurethane, it brings out the characteristic soft grain of suede.

Stand collar design

With a structure that rises to wrap around the neckline, it blocks wind and gives a clean, neat impression.

Flap pockets and hem banding

Square pockets with flaps on the front make it easy to store small items, and the hem banding stably holds the garment's bottom line.

Double-layer stand collar

The stand collar is structured in two layers, and the neckline edge is finished with binding.

Two types of front closures

The front can be fastened with a zipper and snap buttons, and a welt pocket that closes with a zipper is placed on the left chest.

Adjustable edges

The hem can be adjusted with a string and stopper, and elastic is inserted at the sleeve ends.

A high-neck structure that wraps around the neckline

Featuring a high-neck design that wraps up the neck, it softly covers your neckline.

Shirring and waist drawstring

Shirring detail is added to the back of the neck, and an adjustable drawstring at the waist lets you tailor the silhouette to your desired fit.

Blend outer shell and lining composition

Inside the outer shell made of an 88% cotton and 12% nylon blend, a 100% polyester lining is added.

Relaxed balloon silhouette

By adding normal washing to the oversized fit, it creates a silhouette that wraps roundly around the body.

Zipper that opens both ways

By applying a two-way metal zipper, you can adjust the fastening to suit your range of motion or outfit.

Banding and slit pockets

Banding wraps around the cuffs and hem to gather the width, and side-seam slit pockets make it easy to put in and take out belongings.

Goat suede fabric

Processed goat skin 100% suede fabric is used to bring out its characteristic soft grain.

2-way zipper and hidden snaps

Hidden snaps and a 2-way zipper are applied together to the front closure, allowing you to comfortably adjust how it opens and closes.

Hem banding detail

Banding detail is added around the hem, cinching the flat hem width to 42.5cm.