Bartack

Curved cuts and back vents

Curved cuts along the outer seams and vents secured with bartacks near the back of the knees help with ventilation.

Pigment dyeing and washed texture

Natural fine wrinkles are set on the fabric surface through washing after pigment dyeing.

Inner waist drawstring for adjustment

A size-adjusting drawstring inside the waist and belt loops placed on the exterior make it convenient to wear tailored to your body type.

Dyed denim with an added herringbone pattern

Made from dyed fabric with a herringbone pattern, these are barrel leg fit pants that reveal a distinctive grain.

100% cotton material

A single cotton material is used, and dry cleaning is recommended to prevent distortion and damage to the garment.

Neat sewing and trim composition

Featuring diagonal pockets and rear square out-pockets, they are meticulously finished with a YKK zipper, logo-engraved cantons, and bar tacks.

Corduroy and garment dyeing

Through garment dyeing and multiple washings on corduroy fabric of a good thickness for autumn and winter, naturally faded colors were created.

Silhouette planned through collaboration

In collaboration with Broken Umbrella Japan, the basic line that falls straight was established based on HATCHINGROOM regular jeans.

Metal trims and pocket finishing

YKK canton buttons, rivets, and a zipper are applied to the front, and the back pockets are finished with bar-tacks to prevent tearing.

Barrel-leg line and treated fabric

Bio-washed non-fade denim is used to reduce worries about color transfer while bringing out the rounded silhouette.

Front welt pocket placement

Welt pockets are placed low on the front of the pants, adding a clean accent.

Hardware and stitching finish

Finished with a logo-engraved shank button and YKK zipper, while stress points are meticulously reinforced with bartack stitching.

Asymmetrical pocket configuration

The appearances of the two back pockets are configured differently from each other. By varying the left and right shapes, a subtle difference was given to the back silhouette.

Blended material with added stretch

A fabric blending polyester 70%, rayon 27%, and span 3% was used. By adding stretch, there is little hindrance when moving your legs.

Waistline finishing details

It was tidily finished by setting a waistband line at the waist and adding bartack details. By firmly fastening the waistline, it neatly holds the trousers' trim appearance.