Banding

Knit balaclava wearable on its own

It can be detached using the buttons inside the neckline, making it great to wear wrapped together with the outer garment or taken off to wear on its own.

Shirred banding on pockets and hem

The out-pocket openings, sleeves, and hem are finished with shirred banding to maintain the garment's shape and prevent cold air from seeping in.

Use of polyester filling

Filled with 100% polyester padding on the inside, it can be worn lightly and warmly.

Handcrafted eyelet and rivet embellishments

YKK metal eyelets and rivets are placed by hand along the front decorative pocket lines, giving each piece unique variations.

Contrasting hem layering

Different-colored fabric is patched at the hem, creating the look of wearing an extra layer.

Elastic and drawstring waist finish

The entire waist is wrapped with an elastic band and equipped with an adjustable drawstring so you can tighten the circumference appropriately.

Lace-up extending to the toe

The shoelaces extend long down near the toe, and elastic banding is added to the heel.

Lambskin and cowhide composition

Nappa lambskin is used for the upper and shoelaces, and natural cowhide wraps the lining and insole.

Removable insole

The insole inside the shoe can be taken outside, making it easy to care for separately.

Waist Banding and Drawstring

Banding surrounds the entire waist, and an internal drawstring is included so that the circumference can be adjusted to fit the body.

Side and Hip Pockets

There are pockets on the sides and hip area, allowing belongings to be stored separately.

Nylon Outer Fabric Material

The outer fabric of the green color product is composed of 100% nylon fabric, allowing it to be worn lightly.

Turkish lambskin

One hundred percent Turkish lambskin is used throughout the shell, making it flexible and soft.

Lampo zipper

An Italian Lampo zipper detail is applied to the front closure for a clean fastening.

Red contrast lining

One hundred percent cupro material is used throughout the lining, accented with a red color contrast.

Decorative pockets and metal trims

Metal eyelets are arranged along the front decorative pocket lines. YKK non-toxic trims are used for the eyelets and rivets.

Mini french terry and contrasting layer

A cotton-poly blend mini french terry fabric is used. Contrasting fabric is layered below the hem to give the impression of being naturally layered.

Elastic waistband and built-in drawstring

An elastic band surrounds the entire waist. With the drawstring placed inside, the waist circumference can be adjusted to fit your body type.

26 oz virgin wool blend material

Crafted from a heavy 26 oz fabric blending 90% virgin wool and 10% nylon, it has a thick substantial feel. Horn buttons are added for a calm, refined finish.

Stand collar and button fastening

Features a stand collar that rises gently up the neck and a generous silhouette. It can be comfortably fastened with six horn buttons aligned on the front.

Jacket and pants setup coordination

It can be worn together with the shawl collar jacket or banding pants, making it suitable for styling as a complete coordinated outfit.

Virgin wool blend fabric

Uses a fabric blending virgin wool 90% and nylon 10% to bring out its distinctive soft texture.

Waist banding and string

Applies an elastic band and drawstring to the waistline so you can freely adjust the circumference when wearing.

Set-up configuration

Can be coordinated as a matching set together with a handmade shawl collar jacket or vest of the same gray color.

Nappa lambskin and cowhide lining

Nappa lambskin is used for the upper, and cowhide lines the lining and insole where your foot touches.

Hand-stitched driving sole

Full-grain kipskin and a TR material outsole are joined together by hand-stitching.

Rear banding and detachable insole

Banding is inserted at the heel to make them easy to put on and take off, and a removable insole that can be taken out is included.

Soft brushed texture

Made with soft brushed fabric, it can be worn warmly even in cold winter.

Banding and string adjustment

By applying both banding and an adjustment drawstring to the waist, it can be comfortably adjusted to fit one's own waist circumference.

Design omitting pockets

Without separate pockets, the straight line is maintained as it is without anything catching.

Nappa lambskin upper

Soft nappa lambskin is used on the exterior, and natural cowhide is lined on the lining and insole that directly touch the foot.

Combined outsole and removable insole

Equipped with a driving outsole combining full-grain kipskin and TR material, and the insole can be removed for pleasant care.

Toe lace-up and rear banding

Leather laces extend near the toe so they can be tightened to fit the width of the foot, and rear heel banding flexibly holds the heel.

Suede-textured faux leather

By blending 90% polyester and 10% polyurethane, it brings out the characteristic soft grain of suede.

Stand collar design

With a structure that rises to wrap around the neckline, it blocks wind and gives a clean, neat impression.

Flap pockets and hem banding

Square pockets with flaps on the front make it easy to store small items, and the hem banding stably holds the garment's bottom line.

High neck and double-breasted

A double-breasted button design is applied to bring out a voluminous silhouette. Raising the collar lets you fasten it as a high neck to wrap your neck.

Banded finish and actual measurements

Band finishing is added to the hem to neatly hold the bottom edge. Crafted with a 58cm chest width and a 33cm armhole, it can be worn with a roomy fit.

Synthetic leather and polyester lining

100% synthetic leather is used for the shell material. The inside is lined with 100% polyester to complete the garment's construction.