hmmm, a good brandFASHIONLIVINGFIELDTASTEMY ACCOUNT

KOJAEN

Products with Jackets in the name total 807 across 24 Fashion brands.

The materials listed in the material information are Polyester 301, Cotton 252, Nylon 131, Wool 84, and Leather 78.

Latest reference date October 16, 2026 · Official store product information

Low TideLT-15

HIGH NECK DOUBLE LEATHER JACKET [CAMEL] - Low Tide

CAMEL₩348,000Available for international purchaseOfficial product page ↗

This is a blouson jacket made with a synthetic leather shell and a polyester lining. With a double-breasted button setup and a banded hem, it features a relaxed, voluminous silhouette. When you raise the collar to fasten it into a high neck, it blocks the cold wind, making it suitable for going out.

HIGH NECK DOUBLE LEATHER JACKET [CAMEL] - Low Tide photo 1/4
HIGH NECK DOUBLE LEATHER JACKET [CAMEL] - Low Tide photo 2/4
HIGH NECK DOUBLE LEATHER JACKET [CAMEL] - Low Tide photo 3/4
HIGH NECK DOUBLE LEATHER JACKET [CAMEL] - Low Tide photo 4/4

01 / 04

Why this product

We selected this after carefully reviewing the collar and button setup, the banded hem and roomy dimensions, and the practical materials.

  1. High neck and double-breasted

    A double-breasted button design is applied to bring out a voluminous silhouette. Raising the collar lets you fasten it as a high neck to wrap your neck.

  2. Banded finish and actual measurements

    Band finishing is added to the hem to neatly hold the bottom edge. Crafted with a 58cm chest width and a 33cm armhole, it can be worn with a roomy fit.

  3. Synthetic leather and polyester lining

    100% synthetic leather is used for the shell material. The inside is lined with 100% polyester to complete the garment's construction.

RECTORE-5

What does 'FABRIC MADE IN JAPAN' in the description mean?

Both Japan and Korea are written in the same product description, making it confusing as to which one is the country of origin for this garment.

FLUID DOUBLE SUIT JACKET (DARK NAVY)
hmmm editorial answer

This marking means that the fabric was woven in Japan, while there is a separate indication that the place where the jacket was finished using that fabric is Korea.

Official product page ↗FLUID DOUBLE SUIT JACKET (DARK NAVY)₩695,000
Low TideLT-17

DRAWSTRING LEATHER HALF JACKET [BROWN] - Low Tide

BROWN₩398,000Available for international purchaseOfficial product page ↗

This is a leather jacket given a thin, light volume with 1 oz polyester padding. A waist drawstring and pleated front pockets help adjust the silhouette and provide storage. With a half length that covers the hips, it is suitable for lightly throwing on during chilly days.

DRAWSTRING LEATHER HALF JACKET [BROWN] - Low Tide photo 1/4
DRAWSTRING LEATHER HALF JACKET [BROWN] - Low Tide photo 2/4
DRAWSTRING LEATHER HALF JACKET [BROWN] - Low Tide photo 3/4
DRAWSTRING LEATHER HALF JACKET [BROWN] - Low Tide photo 4/4

01 / 04

Why this product

Selected for its waist-cinching drawstring and light padding.

  1. Waist drawstring structure

    Using the interior waist drawstring, you can shape the width of the half-length jacket into your desired silhouette.

  2. Built-in 1 oz padding

    Filled with 1 oz 100% polyester padding, it offers an unburdensome volume.

  3. Three-dimensional pleated pockets

    Out-pockets with pleats on the front add dimension and provide room to store your belongings.

LOW CLASSICLC-95

What role does the faux leather overlaid along the zipper line play?

While reading the product description for the fur jacket, I saw a phrase mentioning that faux leather trimming was added along the zipper line. I am curious about the reason for overlaying leather onto fur clothing and its actual practical use.

Fuzzy Fur Jacket_Ivory
hmmm editorial answer

It is a finish that helps prevent fur from catching in the zipper teeth and clears the zipper path so it can open and close smoothly.

Official product page ↗Fuzzy Fur Jacket_IvorySold Out
Low TideLT-19

MINIMAL TAILORED JACKET [CHARCOAL] - Low Tide

CHARCOAL₩298,000Available for international purchaseOfficial product page ↗

This tailored jacket features an outer fabric blended with polyester, rayon, and polyurethane, lined with a cotton blend. The front closure is neatly finished without exposing buttons on the outside, and it is made in a single size with a total length of 65cm.

MINIMAL TAILORED JACKET [CHARCOAL] - Low Tide photo 1/4
MINIMAL TAILORED JACKET [CHARCOAL] - Low Tide photo 2/4
MINIMAL TAILORED JACKET [CHARCOAL] - Low Tide photo 3/4
MINIMAL TAILORED JACKET [CHARCOAL] - Low Tide photo 4/4

01 / 04

Why this product

We thoroughly examined its concise neatness and dimensions.

  1. A closure not exposed on the outside

    The front closure is neatly finished so that buttons are not visible on the exterior, keeping the outfit clean.

  2. Fabric blended with polyurethane

    It features an outer fabric composed of 78% polyester, 20% rayon, and 2% polyurethane, lined with a cotton blend.

  3. A single size with a total length of 65cm

    It is crafted in a single size with a shoulder width of 47.5cm, chest section of 52cm, and a total length of 65cm.

AMOMENTOAM-37

TAFFETA CROPPED JACKET

₩249,000Official product page ↗

This is a cropped jacket crafted from taffeta fabric blending 50% each of nylon and polyester. It fastens with hidden snaps that do not show on the outside and an inner collar button, and is finished with a short total length of 45.5cm. With its concise silhouette, it is suitable as lightweight outerwear to slip into.

TAFFETA CROPPED JACKET photo 1/4
TAFFETA CROPPED JACKET photo 2/4
TAFFETA CROPPED JACKET photo 3/4
TAFFETA CROPPED JACKET photo 4/4

01 / 04

Why this product

Chosen for its lightweight taffeta material and clean, uncomplicated fastening method.

  1. Taffeta blend material

    Crafted from taffeta fabric blending 50% nylon and 50% polyester.

  2. Hidden snap fastening

    Can be fastened neatly with hidden snaps that do not show on the outside and an inner collar button.

  3. Measurements and cropped line

    A size 0 jacket composed with a short length having a total length of 45.5cm.

Low TideLT-21

MINIMAL TAILORED JACKET [MELANGE GREY] - Low Tide

MELANGE GREY₩298,000Available for international purchaseOfficial product page ↗

This is a tailored jacket crafted from a fabric woven by blending polyester, rayon, and polyurethane. The front is finished with a structure that does not expose the buttons on the outside, and diagonal flap pockets are placed on the sides. Made in a single size with room in the shoulders and chest width, it is suitable for lightly layering over daily wear.

MINIMAL TAILORED JACKET [MELANGE GREY] - Low Tide photo 1/4
MINIMAL TAILORED JACKET [MELANGE GREY] - Low Tide photo 2/4
MINIMAL TAILORED JACKET [MELANGE GREY] - Low Tide photo 3/4
MINIMAL TAILORED JACKET [MELANGE GREY] - Low Tide photo 4/4

01 / 04

Why this product

We selected this by looking into the neat finish with concealed buttons and the blend of three fibers.

  1. Concealed buttons

    Because the buttons are not exposed on the outside, the front continues smoothly without interruption.

  2. Blend of three fibers

    The outer fabric is woven by blending 80% polyester, 17% rayon, and 3% polyurethane.

  3. Relaxed single size

    Made with specifications of 65cm total length, 47.5cm shoulder, and 52cm chest width, it can be comfortably layered over other clothing.

RYOORY-53

Asymmetric double-breasted jacket #4

Sold OutOfficial product page ↗

This is an in-between season blazer made in-house domestically from a fabric woven by blending cotton and polyester in equal proportions. It features four buttons attached in two rows at the center of the front panel and patch pockets added below. It is good to wear as outerwear during seasons when temperatures change.

Asymmetric double-breasted jacket #4 photo 1/2
Asymmetric double-breasted jacket #4 photo 2/2

01 / 02

Why this product

Chosen for its usefulness suitable for in-between seasons and its sturdy blend fabric.

  1. 50/50 Cotton and Polyester Blend

    The body is constructed from a fabric woven by blending cotton and polyester in equal proportions.

  2. Natural Aging

    With its durability, it can be worn for a long time and ages naturally as time passes.

  3. Domestically Self-Manufactured In-Between Season Jacket

    An in-between season blazer manufactured in-house domestically, suitable to wear during transitional weather.

RYOORY-45

Asymmetric blazer #9 [black]

blackSold OutOfficial product page ↗

This jacket is crafted from a wool and cotton blend fabric from Shibaya, which has been producing textiles since 1907. It features front buttons and sleeve slits, and is lined with a Bemberg and polyester blend fabric. It is versatile enough to wear for formal gatherings or everyday outings.

Asymmetric blazer #9 [black] photo 1/4
Asymmetric blazer #9 [black] photo 2/4
Asymmetric blazer #9 [black] photo 3/4
Asymmetric blazer #9 [black] photo 4/4

01 / 04

Why this product

We carefully examined the fabric from a textile maker with a long history and the finishing composition of the lining.

  1. Wool and cotton blend fabric from Shibaya

    Fabric from Shibaya, which has been producing textiles since 1907, was used. It is sturdily composed by blending cotton and wool at 40% each.

  2. Material from a high-end collaborative manufacturer

    It was crafted by sourcing fabric from a specialized manufacturer that has presented materials in collaboration with high-end brands.

  3. Bemberg blend lining composition

    The interior is smoothly finished with a fabric blending 30% Bemberg and 70% polyester.