Adjustable

조절할 수 있는 옆선 타이

허리 옆선에 있는 타이를 묶는 정도에 따라 원하는 품과 실루엣으로 조절할 수 있습니다.

단추로 여닫는 가디건

멀티 립 조직으로 편직했으며, 앞단추를 열고 닫는 정도에 따라 깃을 다르게 연출합니다.

네 가지 원사를 섞은 소재

아크릴 45%, 나일론 40%, 울 10%, 모헤어 5%를 함께 혼용하여 짰습니다.

Wool-cashmere blend

This is a single-breasted balmacaan coat crafted from a wool-cashmere blend fabric.

Two waist styling options

The self-fabric waist belt can be worn unfastened or fastened. A collar tab is placed at the neck.

Adjustable sleeves

The front fastens with horn buttons, and the sleeve tabs let you adjust the silhouette of the wristline.

Goose down 90/10 filling

Filled with goose down in a ratio of 90% down clusters and 10% feathers, it is light and warm.

Hood zipper slit

A zippered slit is placed in the center of the hood, allowing it to be opened and closed depending on the situation.

Sleeve and hem adjustment structures

The snap buttons on the cuffs and string stoppers at the hem are used to adjust the fit and width.

High-neck collar wrapping the neck

The high-rising collar cozily covers the neck, and the roomy body and sleeves prevent pinching even when layering multiple pieces.

Zipper closure and diagonal pockets

Featuring a front zipper for easy opening and closing, and diagonally placed pockets allow hands to slip in naturally.

Hem string and sleeve adjustment tabs

By pulling the hem string and sleeve tabs to adjust the circumference, you can block cold winds and directly regulate the garment's volume.

Snap button pullover

Polar fleece fabric is used, and snap buttons are attached to the collar so it can be easily put on and taken off over the head.

Binding diagonal pockets

Two diagonal pockets with binding finish are placed on both sides of the waist, making it comfortable to rest hands or store small items.

Hem string detail

An adjustable string and stopper are placed at the hem, allowing you to properly tighten the circumference according to the influx of wind.

2웨이 지퍼와 메탈 스냅 여밈

앞여밈에 YKK 2웨이 지퍼와 메탈 스냅 파츠를 썼습니다. 상황에 맞춰 여밈 방식을 달리하거나 지퍼를 위아래로 조절할 수 있습니다.

가먼트 워싱 처리한 혼방 원단

면 66%와 나일론 34% 비율의 혼방 원단을 썼습니다. 제작 마무리 단계에서 가먼트 워싱 처리를 거쳐 자연스러운 표면감을 살렸습니다.

다른 모즈 파카와의 내피 호환

필요에 따라 옵션에서 내피를 추가할 수 있습니다. M65 필드 및 숏 모즈 파카의 내피와 서로 호환되어 계절 변화에 유연하게 대응합니다.

구스다운 90/10 충전재

다운 90%와 페더 10% 비율의 구스다운을 채워 가벼우면서도 따뜻한 공기를 알맞게 품습니다.

리사이클 퍼텍스 퀀텀 원단

겉감과 안감 모두 100% 리사이클 폴리에스터 소재의 퍼텍스 퀀텀 원단을 적용했습니다.

탈부착 후드와 조절 스트링

칼라 안쪽 내장 스냅으로 후드를 떼어낼 수 있고 가죽 스토퍼가 달린 스트링으로 둘레를 조절합니다.

Two types of leather

The upper is cowhide and the lining is sheepskin.

50mm heel

The heel height is 50mm.

Options tailored to your feet

Based on true to size, if your foot width is narrow or your feet are lean, you can choose a half size down. Foot width widening and instep height raising can also be custom-made as options.

Filling with a higher down cluster ratio

Filled with goose down filling at a ratio of 90% down and 10% feather, it is light and warm compared to its volume.

Double closure with zipper and buttons

Arranging a placket and military slot buttons together over the two-way zipper blocks the wind blowing through gaps in the front opening.

Adjustable strings and stoppers

Pulling the strings and stoppers provided at the hood and hem narrows the garment circumference, allowing you to adjust the fit so cold air does not enter.

Cowhide upper and lambskin lining

The upper is made of cowhide, and the lining is layered with lambskin. It is crafted using natural leather all the way to the interior that touches the foot.

50mm heel

With a heel height set at 50mm, you can walk stably.

Personal custom-made

In addition to foot width and instep adjustments, it can be custom-made to your feet including special sizing, leather types, heel height, and boot circumference.

90/10 goose down filling

Filled with goose down in a ratio of 90% down and 10% feathers to provide warmth relative to its weight.

Double closure structure

A placket with slotted buttons covers the two-way zipper to block wind coming through the front.

Adjustment strings and sleeve ribs

Tightening the stopper strings on the hood and hem while wrapping the inner cuffs helps keep warmth from escaping outside.

Cowhide upper and sheepskin lining

Cowhide is used for the upper, and it is lined with sheepskin.

50mm heel height

Crafted with a heel height of 50mm.

Custom foot-fit options

Foot width and instep height can be custom-adjusted, and changes to heel height or boot circumference are also possible.

Diamond quilting pattern

Filled evenly with 100% polyester padding in a diamond grid, it maintains light volume without clumping.

Double collar and composite closure

By raising the double stand collar and closing the two-way zipper and military slotted button placket, it layers protection against the cold air.

Binding finish and hem adjustment

The garment edges and cut lines are wrapped with binding for durability, and the hem width can be adjusted with the drawstring and stopper.

Lizard pattern calfskin

A lizard pattern is embossed on the surface of Italian calfskin to capture the leather's unique grain.

Square buckle and engraved logo

Fitted with the brand's signature square buckle, with a logo engraved in the bottom center.

Adjustable 1.9 width specification

With a width of 1.9 and a horizontal length of 109, the length can be adjusted to fit your body type.

Convertible collar with lambskin

Lambskin is applied to the collar area and equipped with an adjustable buttoned tab. Fastening the buttons with the collar raised prevents wind from entering the neck.

Diagonal flap pockets and hidden buttons

The front buttons are concealed so they do not show on the outside, and three diagonal flap pockets are arranged. Concealing the buttons keeps the surface clean, while the pockets offer clear utility.

Wool blend fabric and relaxed silhouette

Made with a woven fabric blending wool 80% and nylon 20%, it offers a generous fit. Even when worn over thick innerwear, it falls comfortably without restricting the body.

Pleasant stretchy material

A garment-washed nylon and polyurethane blend fabric with moisture-absorbing and quick-drying features that dry sweat quickly.

Comfortable waist detail

Features an elastic waistband and single pleat details, paired with a self-fabric belt that allows fine adjustments to the waist circumference.

Long silhouette designed for mobility

With a back slit added to an H-line that falls long near the ankles, walking remains comfortable despite the long length.

Double-layer stand collar

The stand collar is structured in two layers, and the neckline edge is finished with binding.

Two types of front closures

The front can be fastened with a zipper and snap buttons, and a welt pocket that closes with a zipper is placed on the left chest.

Adjustable edges

The hem can be adjusted with a string and stopper, and elastic is inserted at the sleeve ends.