hmmm, a good brandJACKSON CHAMELEONFASHIONLIVINGFIELDTASTEMY ACCOUNT

Questions answered using only confirmed facts regarding 'Veneer' from 잭슨 카멜레온.

두꺼운 건식 무늬목에 무광 브러싱 마감을 적용해 만든 소파 테이블입니다. 마주 보는 두 면이 뚫린 긴 몸체 구조로 상판 아래를 수납공간으로 씁니다. 거실 소파 앞에 두고 손 닿는 자리에 물건을 넣어 두기 좋습니다.

Why this product

쓰임새 있는 구조와 정돈된 마감을 보고 골랐습니다.

  1. 개방형 수납 설계

    마주 보는 두 면이 트여 있어 안쪽 공간에 자주 쓰는 물건을 편하게 넣어 둘 수 있습니다.

  2. 브러싱 무광 마감

    두꺼운 건식 무늬목 겉면에 결을 살리는 브러싱 가공을 거치고 번들거림 없는 무광으로 마감했습니다.

  3. 두 가지 색상 구성

    실내 분위기에 맞춰 오크와 월넛 두 가지 색상 가운데 원하는 것을 고를 수 있습니다.

This is a side table crafted to be used alongside the Bolson sofa. Natural wood veneer is added to E0-grade MDF, and the surface is brushed to bring out the grain of solid wood. You can choose a color between oak and walnut to match your taste and space.

Why this product

We selected it by examining its original use placed by a sofa and how the wood was processed.

  1. A side table dedicated to sofas

    It was crafted with its size and use tailored to be used together with the Bolson sofa.

  2. Surface processing that brings out the solid wood grain

    Wood veneer is added to E0-grade MDF, and a brushing technique is applied to recreate the solid wood grain.

  3. Two wood colors

    Depending on your space and taste, you can choose the right color between oak and walnut.

무늬목과 철판으로 제작하고 표면에 브러싱 가공을 적용한 사이드 테이블입니다. 모서리가 둥근 상판 아래로 넓은 기둥 받침이 중앙을 지탱하는 구조입니다. 가로 675mm에 세로 380mm, 높이 433mm의 낮고 넓은 규격으로 소파나 침대 곁에 두고 쓰기 좋습니다.

Why this product

소재의 결을 살린 가공과 안정적인 규격을 바탕으로 골랐습니다.

  1. 브러싱 가공 무늬목

    무늬목과 철판을 사용해 제작했으며, 무늬목 표면에 브러싱 가공을 거쳐 나뭇결을 살렸습니다.

  2. 낮고 넓은 규격

    가로 675mm, 세로 380mm에 높이 433mm로 설계되어 안정감 있게 물건을 올려둘 수 있습니다.

  3. 두 가지 색상 구성

    공간 분위기와 놓을 자리의 톤에 맞춰 오크와 아이보리 가운데 선택할 수 있습니다.

This is a stool that realizes smooth curved surfaces through high-frequency bending veneer technique. Below the handle frame, an open storage space runs through the center. You can use it as a chair to sit on while storing small items at the same time.

Why this product

Selected with a focus on the technique realizing curved surfaces and the finish considerate of space.

  1. High-frequency bending veneer

    By applying high-frequency bending technique to veneer, it neatly realizes a curved structure.

  2. Floor protection gliders

    Bottom gliders made of 80% recyclable materials prevent floor damage and dragging noise.

  3. Two colors

    Available in two options, Light Gray and Peach Echo, allowing you to choose according to the atmosphere of your space.

This is a dining table made with low-iron ultra-clear tempered glass and fumed oak veneer. By backing the underside of the glass with the same color as the body, the colors of the tabletop and the body are matched uniformly. You can comfortably enjoy meals and daily life on a clear tabletop with reduced greenish tint.

Why this product

We chose this dining table by focusing on the clarity and finishing of the tabletop.

  1. Low-iron ultra-clear tempered glass

    Glass with reduced iron content is applied to the tabletop to reduce the greenish tint and secure clear transparency.

  2. Same-color backing finish

    The underside of the glass is backed with the same color as the high-gloss body to unify the overall color tone of the tabletop.

  3. Fumed oak veneer

    A fuming process is applied to oak veneer to calmly realize a deep tone.