hmmm, a good brandPIETONFASHIONLIVINGFIELDTASTELABsMY ACCOUNT

KOJAEN

hmmm has confirmed 51 PIETON Sandals products.

Confirmed facts

hmmm has confirmed 51 PIETON Sandals products.

The materials listed in the material information are Leather 42, Suede 6, Mesh 3, Fabric 2, and Wool 1.

Counted based on official store product information collected up to November 8, 2026. Products link to the official store.

'Sandals' products

and 39 more

PIETON 피에톤PT-9

These sandals feature strings, a midsole, and an insole made from Italian cow leather. Set with a 60mm heel on an angular square midsole, the ends of the strings are finished with metal pipes. Wrap the long strings around your ankle to wear with light, casual outfits.

  1. Italian cow leather

    Italian cow leather is used for the strings, midsole, and throughout the insole.

  2. 60mm heel and square midsole

    An angular square-line midsole is paired with a 60mm-high heel.

  3. Metal pipe finish

    The ends of the strings are neatly finished with metal pipes.

GENK string sandals_umber photo 1/4
GENK string sandals_umber photo 2/4
GENK string sandals_umber photo 3/4
GENK string sandals_umber photo 4/4
Official product page ↗

GENK string sandals_umber

₩327,000Available for international purchase

PIETON 피에톤PT-5

It is a slingback sandal with a wool exterior, so why are the lining and insole lined with cow leather?

It is structured so that the outer surface is made of textured wool fabric, while cow leather is placed on the lining and insole where the foot directly touches.

The outside is textured wool fabric, and the inside is smooth cow leather. FARO slingback sandals_navy wool by PIETON uses a 100% wool fabric in a twill weave with diagonal grain for the upper, which is the shoe's exterior. On the other hand, cow leather is used for the lining wrapping the inside of the instep and for the insole touched by the sole of the foot.

FARO slingback sandals_navy wool
FARO slingback sandals_navy wool
FARO slingback sandals_navy wool
FARO slingback sandals_navy wool
Official product page ↗FARO slingback sandals_navy wool₩297,000Available for international purchase
PIETON 피에톤PT-7

These are sandals made with Italian cow leather for the strings, insole, and midsole, with the strap ends fastened with metal pipes. Rounded rolled leather straps wrap around both the instep and the ankle, and a 60mm heel adds a balanced height. They are great to wear with outfits that expose the ankles to neaten the leg line.

  1. Italian cow leather and metal pipe finishing

    Italian cow leather is used for the strings, insole, and midsole. The ends of the strings are fastened with metal pipes so they do not unravel.

  2. 60mm heel wrapping the instep and ankle

    Thickly rolled strings wrap around the instep and ankle to secure the fit. A 60mm heel is applied to give a stable sense of height when walking.

  3. Custom production through official channels

    You can change the leather type, heel height, and foot circumference as desired. Custom orders tailored to your foot measurements and usage are possible through official consultation channels.

GENK string sandals_white photo 1/4
GENK string sandals_white photo 2/4
GENK string sandals_white photo 3/4
GENK string sandals_white photo 4/4
Official product page ↗

GENK string sandals_white

₩327,000Available for international purchase
PIETON 피에톤PT-3

These are open-toe slingback sandals. Cowhide is used for the upper, lining, and insole, and you can choose between 50mm and 70mm heel heights.

  1. Cowhide used inside and out

    Cowhide was used for all of the upper, lining, and insole.

  2. Nine sizes

    It is divided into nine sizes from 35 (220) to 39 (260).

  3. Request for widened width

    If you leave a product inquiry after placing an order, it can be manufactured with a widened width.

FARO slingback sandals_white photo 1/4
FARO slingback sandals_white photo 2/4
FARO slingback sandals_white photo 3/4
FARO slingback sandals_white photo 4/4
Official product page ↗

FARO slingback sandals_white

₩297,000Available for international purchase

PIETON 피에톤PT-1

How are the different types of leather used across the parts of the Linz string sandals?

Cow leather is used for the strings that wrap around the instep, goat suede is used for the midsole that supports the sole of the foot, and sheepskin is used for the insole where the foot touches.

The first part that catches the eye on PIETON's LINZ string sandals_white/blue is the instep. For the strings, which are thickly woven with a round cross section, subtly glossy cow leather is used.

LINZ string sandals_white/blue
LINZ string sandals_white/blue
LINZ string sandals_white/blue
LINZ string sandals_white/blue
Official product page ↗LINZ string sandals_white/blue₩308,000Available for international purchase