hmmm, a good brandPIETONFASHIONLIVINGFIELDTASTEMY ACCOUNT

KOJAEN

hmmm has confirmed 200 피에톤 Shoes products.

Confirmed facts

hmmm has confirmed 200 피에톤 Shoes products.

The materials listed in the material information are Leather 165, Suede 20, Mesh 9, Rayon 4, and Velvet 4.

Counted based on official store product information collected up to October 16, 2026. Products link to the official store.

'Shoes' products

and 188 more

PIETONPT-18

ALBI wrinkle boots_black

black₩602,100Available for international purchaseOfficial product page ↗

These boots are crafted with a cowhide upper lined with sheepskin. They feature a 50mm heel and wrinkles along the side seam of the ankle. Several measurements, including foot width and instep height, can be customized to fit your body type.

ALBI wrinkle boots_black photo 1/4
ALBI wrinkle boots_black photo 2/4
ALBI wrinkle boots_black photo 3/4
ALBI wrinkle boots_black photo 4/4

01 / 04

Why this product

Selected focusing on the leather composition and customization options.

  1. Cowhide upper and sheepskin lining

    Cowhide is used for the upper, and it is lined with sheepskin.

  2. 50mm heel height

    Crafted with a heel height of 50mm.

  3. Custom foot-fit options

    Foot width and instep height can be custom-adjusted, and changes to heel height or boot circumference are also possible.

PIETONPT-17

LORNE sleek pumps_cacao suede

₩341,100Available for international purchaseOfficial product page ↗

These are 50mm heel pumps made with a lambskin suede upper and a sheepskin lining. They feature a pointed toe and deeply scooped side lines. They are good to wear for formal occasions or neat outfits.

LORNE sleek pumps_cacao suede photo 1/4
LORNE sleek pumps_cacao suede photo 2/4
LORNE sleek pumps_cacao suede photo 3/4
LORNE sleek pumps_cacao suede photo 4/4

01 / 04

Why this product

Everything from the leather materials to the heel height and custom options has been meticulously refined.

  1. Sheepskin upper and lining

    Lambskin suede is used for the upper, and sheepskin is also applied to the lining.

  2. 50mm heel height

    The heel height is set at 50mm, made so that it is neither excessively low nor high.

  3. Foot fitting and custom support

    You can select foot width widening and instep heightening options, and changing the leather or heel height is also possible.

PIETONPT-16

LORNE sleek pumps_black suede

black suede₩341,100Available for international purchaseOfficial product page ↗

These shoes are crafted with lambskin suede for the upper and sheepskin for the lining. Fitted with a 50mm heel, they can be worn custom-fitted by choosing foot width and instep options. They are suitable for wearing across everyday outfits and formal wear alike.

LORNE sleek pumps_black suede photo 1/4
LORNE sleek pumps_black suede photo 2/4
LORNE sleek pumps_black suede photo 3/4
LORNE sleek pumps_black suede photo 4/4

01 / 04

Why this product

Selected after thoroughly examining the leather usage and custom options.

  1. Lambskin suede and sheepskin

    Lambskin suede is used for the upper, and sheepskin lines the interior.

  2. 50mm heel

    With the heel height set to 50mm, you can walk with ease.

  3. Custom foot width and instep options

    Options for widening the foot width and raising the instep are provided so you can wear them tailored to your feet.

PIETONPT-15

VASTO frame boots_black

black₩350,100Available for international purchaseOfficial product page ↗

These are 50mm heeled boots made with cowhide on the outside and a sheepskin lining on the inside. You can wear them fitted to your feet by choosing foot width widening and instep height raising customizations.

VASTO frame boots_black photo 1/4
VASTO frame boots_black photo 2/4
VASTO frame boots_black photo 3/4
VASTO frame boots_black photo 4/4

01 / 04

Why this product

Selected after looking at the leather composition and detailed customization options.

  1. Cowhide upper and sheepskin lining

    Cowhide is used for the outer material, and sheepskin lines the inside.

  2. 50mm heel height

    The heel is made to a specification of 50mm in height from the ground.

  3. Foot shape customization options

    Custom-made production is available by selecting foot width widening and instep height raising options.

PIETONPT-14

TINOS bloom boots_toffee

₩440,100Available for international purchaseOfficial product page ↗

These boots are crafted with a cowhide upper and a lambskin lining. They feature a flat square toe and a 50mm heel, with a generously open ankle opening. Tailor the foot width, instep, and circumference to your body shape for a stable everyday wear.

TINOS bloom boots_toffee photo 1/4
TINOS bloom boots_toffee photo 2/4
TINOS bloom boots_toffee photo 3/4
TINOS bloom boots_toffee photo 4/4

01 / 04

Why this product

Chosen for the leather construction and the wide variety of custom options.

  1. Cowhide upper and lambskin lining

    The upper is made of cowhide, and the lining is layered with lambskin. It is crafted using natural leather all the way to the interior that touches the foot.

  2. 50mm heel

    With a heel height set at 50mm, you can walk stably.

  3. Personal custom-made

    In addition to foot width and instep adjustments, it can be custom-made to your feet including special sizing, leather types, heel height, and boot circumference.

PIETONPT-13

TINOS bloom boots_black

black₩440,100Available for international purchaseOfficial product page ↗

These are black boots made with a cowhide upper and a sheepskin lining. They feature a 50mm heel, and you can wear them tailored to your feet by adjusting for half sizes as well as foot width and instep height.

TINOS bloom boots_black photo 1/4
TINOS bloom boots_black photo 2/4
TINOS bloom boots_black photo 3/4
TINOS bloom boots_black photo 4/4

01 / 04

Why this product

The leather composition, the 50mm heel, and the customized fit options are the reasons for choosing them.

  1. Two types of leather

    The upper is cowhide and the lining is sheepskin.

  2. 50mm heel

    The heel height is 50mm.

  3. Options tailored to your feet

    Based on true to size, if your foot width is narrow or your feet are lean, you can choose a half size down. Foot width widening and instep height raising can also be custom-made as options.

PIETONPT-12

If the ball width or calf circumference doesn't fit, can I place an order customized to my measurements?

I have found shoes I like, but I am hesitating to purchase because the ball width or boot shaft circumference does not fit. I would like to check whether I can customize them to my foot measurements or a preferred leather instead of standard specifications.

hmmm editorial answer

Through the official consultation channel, you can inquire about custom production to change to special sizes, boot shaft circumference, heel height, and leather type.

Linked product ↗ERICE brogue pumps_black₩349,000Available for international purchase
Linked product ↗SIENA sling-back pumps_matte black₩338,000Available for international purchase
PIETONPT-11

PERTH wide boots_white

white₩468,000Available for international purchaseOfficial product page ↗

These ankle boots are crafted by wrapping matte-textured Italian cowhide on both the outer and lining. The toe is refined into a semi-square line and cuts are minimized to keep the surface smooth. Featuring a low 30mm heel and a relaxed shaft, they are great for wearing comfortably in daily life.

PERTH wide boots_white photo 1/4
PERTH wide boots_white photo 2/4
PERTH wide boots_white photo 3/4
PERTH wide boots_white photo 4/4

01 / 04

Why this product

We chose this pair because the clean finish and customizable options make it easy to keep by your side for a long time.

  1. Semi-square toe and cut lines

    The toe is refined into a semi-square line, and outer cuts have been minimized. The stitches are hidden on the inner side of the foot to accentuate smooth lines.

  2. Italian cow leather

    Italian cowhide with a matte texture wraps both the outer and lining. Even the inside that touches the foot is finished with the same leather.

  3. Customized heel and circumference

    In addition to the standard 30mm heel height, you can custom-order the ankle circumference, leather, and heel height as desired.

PIETONPT-10

It says the ball of the foot is generously sized, so why is it recommended to wear a half size larger?

The shoe description states that it is a last with a generous ball of the foot width, so the shopper was planning to buy their true size, but is contemplating which size to choose after seeing the recommendation to order a half size larger.

LUND vintage pumps_prussian blue
hmmm editorial answer

Even if a last with a generous ball of the foot width is used, the nature of the pointed-toe design requires a half-size allowance to prevent the toes from hitting the front for comfort.

Official product page ↗LUND vintage pumps_prussian blue₩328,000Available for international purchase
PIETONPT-9

GENK string sandals_umber

₩327,000Available for international purchaseOfficial product page ↗

These sandals feature strings, a midsole, and an insole made from Italian cow leather. Set with a 60mm heel on an angular square midsole, the ends of the strings are finished with metal pipes. Wrap the long strings around your ankle to wear with light, casual outfits.

GENK string sandals_umber photo 1/4
GENK string sandals_umber photo 2/4
GENK string sandals_umber photo 3/4
GENK string sandals_umber photo 4/4

01 / 04

Why this product

Three reasons for choosing these sandals.

  1. Italian cow leather

    Italian cow leather is used for the strings, midsole, and throughout the insole.

  2. 60mm heel and square midsole

    An angular square-line midsole is paired with a 60mm-high heel.

  3. Metal pipe finish

    The ends of the strings are neatly finished with metal pipes.

PIETONPT-5

It is a slingback sandal with a wool exterior, so why are the lining and insole lined with cow leather?

Asked when curious why cow leather is placed on the inside and footbed that come into contact with the skin in a sandal made with wool fabric.

FARO slingback sandals_navy wool
hmmm editorial answer

It is structured so that the outer surface is made of textured wool fabric, while cow leather is placed on the lining and insole where the foot directly touches.

Official product page ↗FARO slingback sandals_navy wool₩297,000Available for international purchase
PIETONPT-7

GENK string sandals_white

white₩327,000Available for international purchaseOfficial product page ↗

These are sandals made with Italian cow leather for the strings, insole, and midsole, with the strap ends fastened with metal pipes. Rounded rolled leather straps wrap around both the instep and the ankle, and a 60mm heel adds a balanced height. They are great to wear with outfits that expose the ankles to neaten the leg line.

GENK string sandals_white photo 1/4
GENK string sandals_white photo 2/4
GENK string sandals_white photo 3/4
GENK string sandals_white photo 4/4

01 / 04

Why this product

Selected after looking at the finishing quality of the leather and the structure of the strings extending up to the ankle.

  1. Italian cow leather and metal pipe finishing

    Italian cow leather is used for the strings, insole, and midsole. The ends of the strings are fastened with metal pipes so they do not unravel.

  2. 60mm heel wrapping the instep and ankle

    Thickly rolled strings wrap around the instep and ankle to secure the fit. A 60mm heel is applied to give a stable sense of height when walking.

  3. Custom production through official channels

    You can change the leather type, heel height, and foot circumference as desired. Custom orders tailored to your foot measurements and usage are possible through official consultation channels.