hmmm, a good brandBY HEYDEYFASHIONLIVINGFIELDTASTEMY ACCOUNT
Questions asked about 바이헤이데이(BY HEYDEY) and their answers. Each answer is linked to its source.
마이크로파이버 중량 솜을 채우고 생활 발수와 오염 관리가 쉬운 파고텍스 패브릭으로 감싼 쿠션입니다. 가로세로 550밀리미터에 폭 80밀리미터 크기로 소파나 침대 곁에 두고 쓰기 알맞습니다. 기댈 때 일반 솜 쿠션과 달리 무게감 있게 몸을 받쳐줍니다.
01 / 04
매일 몸을 기대는 물건이기에 속재료의 무게감과 겉감의 관리 편의를 함께 살폈습니다.
마이크로파이버 100% 내장재
마이크로파이버 중량 솜을 채워 일반 솜 쿠션과 다른 묵직한 무게감을 전합니다.
생활 발수와 오염 관리 기능
오코텍스 인증을 받은 파고텍스 패브릭을 써서 생활 발수와 이지클린 기능으로 오염을 편하게 관리합니다.
가로세로 550mm 규격
가로와 세로 550밀리미터에 폭 80밀리미터 크기로 제작되어 기댈 때 넉넉하게 몸을 받칩니다.
This desk features a tabletop made of PB and LPM materials with Easy Touch post-processing and urethane coating, along with a power housing to organize wiring. Measuring 1,190mm in width and 690mm in depth, it is well suited for workspaces using a desktop together with equipment. A 15mm-high rim along the back edge of the tabletop keeps writing utensils from rolling and falling to the floor.
01 / 04
Three reasons that keep the workspace from getting cluttered and focused on its original purpose.
Power housing to help organize wiring
Eight cable holes on both sides gather and route cables downward, and a monitor arm can be neatly assembled through the front hole.
Tabletop finish reducing scratches and fingerprints
Applying a special Easy Touch post-processing to the tabletop reduces fingerprints and hand marks, preventing scratches and contamination.
Wing structure preventing items from falling
A 15mm-high rim around the edge of the tabletop prevents pens or small tools from rolling and falling to the floor.
LPM is bonded to both sides of the PB board, and the sides are finished with ABS edges. A specially post-processed tabletop that prevents fingerprints and scratches is paired with powder-coated steel legs. Measuring 1,190mm in width and 590mm in depth, it is suitable for placing a laptop in a home office.
01 / 04
We selected a desk that allows you to work in a home office space with less concern about fingerprints or scratches.
Tabletop processing that reduces fingerprints and scratches
By adding Easy Touch special post-processing to the double-sided LPM tabletop, it prevents fingerprint marks, everyday scratches, and daily stains.
Compact depth tailored for laptop work
Measuring 1,190mm in width and 590mm in depth, it creates a laptop working environment without taking up much space in the room.
Powder-coated steel legs with a matte texture
A fine-texture powder coating is applied to the welded steel legs to create a calm matte surface.
A mobile storage cabinet divided into one top drawer and an open lower space. Equipped with an injection-molded plastic inner drawer and full-extension damping rails, it is easy to put in and take out items. It can be used immediately without separate assembly, and all four wheels are fitted with fixing brakes.
01 / 04
Chosen because you can divide spots according to the size and use of items, keeping them easily by your side.
Division of drawer and open storage
Divided into one drawer and an open space, it is good for separating frequently used items from things you want to conceal. The internal dimensions of the 1-tier storage are width 230mm, height 330mm.
Inner drawer with minimal deformation and rails
The inner drawer made of injection-molded plastic experiences less warping than wood and is easy to maintain. A noise-reducing damping function has been added to rails that open all the way.
Mobile wheels and fully assembled configuration
Using German Häfele parts with locking mechanisms on all four wheels, it can be stopped stably in the desired spot. Delivered as a finished product without an assembly process.
This is a 3-tier mobile chest of drawers finished with special post-processing on the outer surface. Equipped with damping rails and brake casters, it can be moved to the needed spot and opened and closed quietly. It is great to place beside a desk to neatly store small office supplies and items.
01 / 04
We thoroughly examined the use of a chest of drawers that is opened and closed every day and moved frequently.
Low-noise rails that open all the way
Full-extension rails help the drawers pull out stably all the way to the end, and the damping function reduces the noise generated when closing.
Surface resistant to fingerprints and scratches
Through Easy Touch special post-processing on the outer surface, fingerprints, scratches, and everyday stains are not easily left.
Brakes applied to all four wheels
Brakes are attached to all 4 wheels from Germany's Häfele, making both movement and fixation simple.
This is a partition panel finished with Easy Touch post-processing on PB board laminated with LPM on both sides to resist fingerprints and scratches. Fixed to the back of the desk top, it blocks the line of sight above the top surface and extends down to conceal the lower space. It is a screen that attaches to compatible standard desks to create an independent, focused space.
01 / 04
Chosen for its neatly organized line of sight across the front and back of the desk, and its finish resistant to everyday stains.
A surface resistant to handprints and stains
By laminating LPM on both sides of PB board and applying special Easy Touch post-processing, it holds up well against fingerprints, scratches, and everyday stains.
Compatible with various desk specifications
It can be combined not only with D02 and M02 desks, but also with D03 and M03 desks, leaving left and right margins according to the size of the desk top.
Height that blocks sightlines above and below
When installed on a D02 desk, the total height becomes 1,110mm, concealing the 350mm gap beneath the desk to tidy sightlines both above and below.
When using furniture in daily life, screws can loosen or tabletop warping can occur, making one curious about the criteria for free repair or exchange. This question seeks to check how issues are handled based on the type of problem, from the day of delivery up to 1 year.
This is a desk partition finished with LPM bonded to both sides of PB board, Easy Touch post-processing, and urethane coating. With a width of 1,370mm, it attaches to the LEFF desk to divide the space above and below the tabletop. It is used to block lines of sight in work spaces with a surface that reduces fingerprints and scratches.
01 / 04
We looked at the dedicated specifications that fit the LEFF desk and the finishing method that reduces surface contamination.
Custom fit specification for desks
Manufactured with a width of 1,370mm, it is designed to be attached to and used with LEFF D03 and M03 desks. Produced to dedicated specifications, it fits properly onto the back of the desk.
Double-sided finish with Easy Touch post-processing
LPM is bonded to both sides of the PB board and special post-processing is added to reduce fingerprints, scratches, and stains. With antibacterial properties, it stays clean even on desks where hands touch frequently.
Edge finish considering durability
ABS edges are attached to the sides and wrapped with urethane coating to enhance the durability of the finish. You can choose a color between Black and White to match the atmosphere of the space.
This cushion is made with full-grain cowhide from Italy's Crest Leather and filled with weighted microfiber batting. With a substantial weight unlike ordinary cotton cushions, it reliably supports the body on the sofa.
01 / 04
We examined the quality of the inner materials and leather so it can be kept and used on the sofa for a long time.
100% microfiber filling
Filled with 100% microfiber weighted batting, it has a substantial weight unlike ordinary cotton cushions.
Italian post-processed full-grain leather
It uses full-grain grade leather, made from European cowhide post-processed with semi-aniline methods at Italy's Crest Leather.
Verified 50,000-cycle flexing durability
Recording 50,000 cycles in the flexing endurance test, the leather withstands everyday bending well.
The back cushions and seat cushions, which come into frequent contact, are covered in removable and washable fabric, while the body section is finished in leather. With eight sizes and modular configurations ranging from Single to Couch, it can be arranged to fit your space. You can choose leg options between steel and stainless steel, and adjust the level with dedicated felt glides.
01 / 03
We looked into the removable fabric structure that makes stain management easy and the diverse modular configurations tailored to living rooms.
Separate finishes of fabric and leather
The seat cushions and back cushions are made of removable and washable fabric, while the remaining integrated parts are finished in leather, making maintenance easy.
Eight customized modules
You can choose to fit your space among a total of 8 sizes and modular configurations, from Single and Basic to Couch and Grande.
Two leg options and leveling
You can choose between black steel and stainless steel legs, and adjust floor leveling with dedicated glides fitted with felt.
This sofa reduces fabric sagging by placing grid stitch quilting on the surface of the seat cushion and securing it to the internal padding. Powder-coated steel or polished stainless steel legs support the lower part, and it can be configured as a single piece or in a combination of three modules to fit the size of your living room. Placing it against a wall or in the center of the living room creates a neat and stable resting space.
01 / 04
Chosen for its stitch quilting that reduces fabric deformation and modular configuration tailored to the living room.
Stitch quilting that reduces deformation
Without incising the fabric, a grid was created only with stitching and fixed to the sponge internal padding. It reduces deformations such as fabric stretching or wrinkling, maintaining its initial firmness for a long time.
Living room tailored modular configuration
In addition to the one-piece basic configuration, three modules can be combined and arranged to fit the living room area. Four legs are independently attached to each module, supporting it stably.
Metal legs in two materials
You can choose between powder-coated black steel with a fine texture and slim stainless steel legs with hand-polishing. It is good for selecting the lower material to match the desired living room atmosphere.
This is a shelving unit with a framework built from stainless steel vertical pipes and rear supports, featuring varying storage heights across its 3 tiers. You can choose between powder-coated white steel panels and vibration-finished stainless steel panels. It is used in spaces to separately display and store books and objects of different sizes.
01 / 04
We selected this by looking at the different storage heights per compartment and the sturdy metal construction.
Different Storage Heights per Tier
Tiers 1 and 3 are 302mm, while the middle tier 2 is 137mm, providing different heights. You can divide and store items across tiers according to the size of books or objects.
Two Types of Panel Finishes
You can choose between powder-coated white steel and vibration surface-treated stainless steel panels to match the atmosphere of your space.
Pillars and Rear Supports
Pillars are erected using stainless steel vertical pipes, and a plated steel X-structure is added to the rear to stably support the panels.
