Hats

Different insulating materials inside and out

The outer shell uses 90% wool fabric and the lining is layered with Polartec microfleece, warmly wrapping your head in cold winds.

Lightweight at 52g

Weighing a light 52g, it reduces the burden of your gear during hikes or trail runs.

Designed for cold seasons

It is made to be used suitably in environments where maintaining body temperature is important, from late autumn to winter.

Knit structure emphasizing elasticity

It applies an elastic knit structure, stretching flexibly when it touches the head.

Period spanning three seasons

It is a hat recommended to be worn across three seasons, from spring and autumn to winter.

Single free size specification

It is produced in a single size measuring 26cm in width and 23cm in height.

두 겹으로 편직한 혼방 원사

아크릴 74%와 폴리에스터 26% 혼방사를 두 겹으로 편직했으며 무게는 88g입니다.

산악 지형 자카드 무늬

산악 지형을 나타낸 자카드 무늬를 넣고 측면 하단에 로고 자수를 두었습니다.

국내 제작 단일 치수

한국에서 제작한 모자로 오프닝 단면 26cm, 깊이 20.5cm의 단일 치수로 구성했습니다.

세 가지 배합의 소재

겉감은 폴리에스터와 아크릴 혼방을 사용했고, 안감은 폴리에스터에 면을 더해 만들었습니다.

국내 제조 공정

코오롱인더스트리(주)FnC부문이 대한민국에서 제조한 모자입니다.

세탁 불가 표기

물세탁과 드라이클리닝이 모두 불가하므로 오염이 묻지 않도록 주의가 필요합니다.

Separable construction

The outer bag and the internal waterproof dry bag and dry backpack are divided, so each can be used independently.

X-Pac functional material

It is durably finished by adding seam tape to X-Pac RX30 Evergreen and RX36 Black polyester fabrics.

Produced locally in the United States

The entire product process was produced locally in the United States.

Signature swirl artwork

ostrya's iconic swirl pattern is intricately knitted in a knit jacquard structure.

Blend of three fibers

Knitted with a wool blend yarn combining 50% wool, 30% nylon, and 20% acrylic.

Classic beanie silhouette

As a product from the brand's classic lineup, it features a stable depth that naturally wraps around the head shape.

Full seam-sealed waterproof finish

It uses waterproof and breathable functional fabric, and all seams undergo seam sealing so water does not seep through.

Detachable chin strap

A chin strap equipped with an adjustable stopper keeps the hat from blowing away in the wind, and it can be detached as needed.

Coolmax sweatband and two sizes

Coolmax material lines the inside where the forehead touches to cool sweat, and it comes in two sizes, M and L, to fit different head sizes.

Signature swirl detail

ostrya's symbolic swirl artwork is knitted in a jacquard structure.

Wool blend yarn

Knitted from yarn blending wool 50%, nylon 30%, and acrylic 20%.

The brand's classic lineup

It is ostrya's basic beanie line designed with a silhouette that wraps around the head shape.

Nylon fabric with windproof and water-repellent qualities

Uses 100% nylon fibers to block wind, repel water droplets, and withstand abrasion well.

Three-dimensional pleats and ventilation holes

Adds three-dimensional pleats to the 5-panel structure to wrap around the head, while ventilation holes relieve internal heat.

Circular buckle adjustment system

Easily adjusts the circumference from 55cm to 60cm utilizing the NIFCO circular adjustment buckle on the back.

Collaboration with Actual Source

It is a capsule collection capturing graphics in partnership with Actual Source, a design studio based in Utah, USA.

Circular logo print

A round logo is printed on the front of the basic model CORPORATE UNIFORM CAP.

Polyester and cotton blend material

A fabric woven by mixing polyester 65% and cotton 35% was used.

Water-repellent and quick-drying fabric

Uses a cotton-feel nylon fabric treated with ripstop processing to repel water droplets and dry quickly.

Mesh placement on brim and rear

Breathable mesh fabric is patchworked onto the top of the brim and the back of the cap to aid air circulation and add three-dimensional texture.

Elastic rope adjustment mechanism

Equipped with a 2.5mm elastic rope adjuster, allowing the circumference to be stably tightened from 55cm to 60cm.

Cotton and acrylic blend knit

Knitted with yarn blended from 85% cotton and 15% acrylic.

Domestic production base

A hat manufactured in the Republic of Korea.

Wear line expanded from furniture

Produced in collaboration with Kolon FnC, under the wearable gear concept applying the design principles of outdoor furniture.

Foldable brim for storage

Both sides of the brim can be folded to reduce volume, making it easy to carry in a pocket or bag.

Mesh show-through detail

The mesh texture subtly shows through beneath the thin nylon fabric, revealing a unique grain.

Buckle circumference adjustment

With the buckle attached at the back, it can be adjusted suitably to fit your head circumference.