케일 CAYL

Different insulating materials inside and out

The outer shell uses 90% wool fabric and the lining is layered with Polartec microfleece, warmly wrapping your head in cold winds.

Lightweight at 52g

Weighing a light 52g, it reduces the burden of your gear during hikes or trail runs.

Designed for cold seasons

It is made to be used suitably in environments where maintaining body temperature is important, from late autumn to winter.

A yarn structure designed with friction in mind

By using yarn spun by wrapping nylon around a wool core, they do not wear out easily even under rough friction.

A pile structure that reduces impact

The inner sole lining is woven in looped pile to ease the burden delivered to the feet when hiking or running.

A wool blend for autumn and winter

Blending wool 32%, nylon 55%, and polyurethane 13%, they are suitable for outdoor activities in chilly seasons.

Maintaining temperature and durability

Merino wool maintains foot temperature, and the nylon wrapping the wool core adds durability.

Pile lining that cushions impact

The inside of the sole is knitted with a looped pile structure to absorb impact when walking and reduce foot fatigue and friction.

Pleasant wearing comfort

Due to the characteristics of wool, sweat odors are less likely to linger, so they can be worn comfortably even during long hikes or runs in autumn and winter.

Yarn combining wool and nylon

Based on yarn with a wool core wrapped in nylon, it is knitted blending wool 32%, nylon 55%, and polyurethane 13%.

Loop pile lining on the sole

The inner lining on the sole side is knitted in a loop-shaped pile structure, tailored for hiking and running activities.

Intended for autumn and winter outdoor activities

Planned with autumn and winter hiking and running in mind, it provides a use suited to the season.

Power Stretch Pro fabric

Made with Polartec® Power Stretch Pro fabric, it provides good stretch and wraps comfortably around the hands.

3-finger touch support

You can directly operate smartphone screens with your thumb, index, and middle fingers without taking off the gloves.

Wrist connecting buckle

A buckle on the wrist that lets you fasten both gloves together eases worries about losing them.

Power Stretch Pro material

Made with Polartec's Power Stretch Pro fabric, offering both stretch and thermal insulation.

Silicone grip on palms

Silicone printing is placed on the palms to reduce slipping when gripping objects.

3-finger screen operation

You can touch screens with your thumb, index finger, and middle finger, allowing you to operate smart devices without taking off the gloves.

Wool blend fabric

A woven fabric blending 75% wool, 21% nylon, and 4% polyurethane is used.

Lightweight

Based on size S, the weight stays at 29g, placing no burden on your wrists.

Touch functionality and friction print

Silicone print is applied to the palms to reduce slipping, and you can operate a smartphone with your thumb, index finger, and middle finger without taking off the gloves.

Lightweight at 77g

The body is lightweight at 77g, reducing the strain placed on your body during hikes.

Waterproof zippered main compartment

A waterproof zipper lines the main pocket to help protect interior belongings from getting wet.

Shoulder strap detachable with buckles

You can adjust the shoulder strap length with tension locks, and easily detach the strap using the buckles.

Large-capacity design for long-distance hikes

Adding a single aluminum support frame to a 55L-class capacity, it stably supports loads during winter hikes or long-distance travel.

Roll-top opening and detachable upper pocket

It flexibly accommodates gear volume with a roll-top method that rolls up the opening to close, and the front upper pocket can be detached as needed.

Back panel structure designed for holding a hydration bladder

A partition for inserting a hydration bladder or mat is placed on the back panel side of the main storage compartment, configured so hoses can pass through both upper sides.

Capacity tailored for long-distance hikes

As it is a size composed of a 40L main and 15L pockets for 55L, it is suitable for dividing and storing winter or long-distance hiking gear.

Stable back panel support design

A single aluminum frame, perforated plate, built-in foam pad, and air mesh structure reliably support the back panel load.

Storage structure tailored to situations

Provides a detachable front upper pouch pocket, and a mat or water bladder can be stored in the partition on the back panel side of the main storage compartment.