hmmm, a good brandCuerenFASHIONLIVINGFIELDTASTELABsMY ACCOUNT

KOJAEN

hmmm has confirmed 77 Cueren Boots products.

Confirmed facts

hmmm has confirmed 77 Cueren Boots products.

The materials listed in the material information are Leather 66, Wool 13, Silk 2, and Suede 2.

Counted based on official store product information collected up to November 8, 2026. Products link to the official store.

'Boots' products

and 65 more

Cueren 쿠에른CU-21

These are mid boots made from nappa-processed lambskin. A 4cm heel is combined with a slip-resistant synthetic rubber molded outsole, and a removable natural cowhide insole that can be dried separately is placed inside. They are well-suited for a neat look in daily life.

  1. Nappa-processed lambskin upper

    Nappa-processed lambskin is used for the outer material.

  2. 4cm heel and molded outsole

    A 4cm heel is combined with a lightweight synthetic rubber molded outsole that helps prevent slipping.

  3. Removable cowhide insole

    Care is easy because the natural cowhide insole can be taken out and dried after wearing.

TORINO 11 MIDDLE ZIP-UP BOOTS photo 1/4
TORINO 11 MIDDLE ZIP-UP BOOTS photo 2/4
TORINO 11 MIDDLE ZIP-UP BOOTS photo 3/4
TORINO 11 MIDDLE ZIP-UP BOOTS photo 4/4
Official product page ↗

TORINO 11 MIDDLE ZIP-UP BOOTS

₩348,000
Cueren 쿠에른CU-20

These boots are crafted with a premium nappa lambskin upper and a natural cowhide lining. They feature a removable cowhide insole and a 4cm heel synthetic rubber molded outsole. They comfortably wrap around your feet, making them great for everyday wear.

  1. Nappa lambskin and cowhide lining

    Premium nappa lambskin is used for the upper, while natural cowhide is applied to the lining and insole that touch the foot. It softly wraps around the entire foot for a comfortable fit.

  2. Removable insole

    Designed with a structure where the insole inside the shoe can be taken out and separated. It is easy to take out the insole separately for care, allowing you to keep it fresh.

  3. 4cm heel and molded outsole

    Equipped with a 4cm high heel on a synthetic rubber TR molded outsole. It provides a moderate height while letting you step stably on the ground.

TORINO 12 SLOUCH BOOTS photo 1/4
TORINO 12 SLOUCH BOOTS photo 2/4
TORINO 12 SLOUCH BOOTS photo 3/4
TORINO 12 SLOUCH BOOTS photo 4/4
Official product page ↗

TORINO 12 SLOUCH BOOTS

₩358,000

Cueren 쿠에른CU-19

How do Cueren boots differ in heel height depending on the model line?

Cueren boots are divided into three heights: a low, flat 1cm flat, a stable 4cm mid-heel, and a sleek 6cm heel.

It starts from 1cm. The flat ankle boot ROME 21 has a heel height of 1cm. Sitting close to the ground, it lessens the strain on the ankles even on days with long walks.

MOSCOW 06 HEEL ANKLE BOOTS
ROME 21 FLAT ANKLE BOOTS
TORINO 10 MIDDLE CHELSEA BOOTS
MOSCOW 06 HEEL ANKLE BOOTS
Official product page ↗MOSCOW 06 HEEL ANKLE BOOTS₩318,000
Official product page ↗ROME 21 FLAT ANKLE BOOTS₩318,000
Official product page ↗TORINO 10 MIDDLE CHELSEA BOOTS₩338,000
Cueren 쿠에른CU-18

These are knee-high boots featuring a premium nappa lambskin upper paired with a natural cowhide lining and a leather insole. A long zipper runs along the inner side following a straight line that reaches just below the knee, and the bottom is supported by a low 2.5cm heel. They have a removable insole structure that can be taken out to dry after wear.

  1. Nappa lambskin upper

    Premium nappa lambskin is used for the upper material.

  2. Natural leather lining and insole

    The lining is wrapped in natural cowhide, and leather material is also applied to the insole.

  3. Removable insole structure

    The insole can be taken out of the shoe, making it easy to care for by removing and drying it after wear.

PRAGUE 15 KNEE HIGH BOOTS photo 1/4
PRAGUE 15 KNEE HIGH BOOTS photo 2/4
PRAGUE 15 KNEE HIGH BOOTS photo 3/4
PRAGUE 15 KNEE HIGH BOOTS photo 4/4
Official product page ↗

PRAGUE 15 KNEE HIGH BOOTS

₩445,000
Cueren 쿠에른CU-17

These knee-high boots feature full-grain kipskin for the upper, and cowhide for the lining and insole. With a low 2.5cm heel and a length that covers up to below the knee, you can wear them comfortably in everyday life.

  1. Full-grain kipskin and cowhide lining

    Full-grain kipskin is used for the upper, and cowhide lines both the interior and the insole. It envelops the entire foot in soft leather.

  2. Detachable removable insole

    The inner insole can be easily taken out as needed, making it easy to care for after wearing.

  3. A 2.5cm heel from the 10th anniversary collection

    This product is part of the Seoul collection celebrating Cueren's 10th anniversary. A low 2.5cm heel is added to reduce the burden when walking.

SEOUL 07 KNEE HIGH BOOTS photo 1/4
SEOUL 07 KNEE HIGH BOOTS photo 2/4
SEOUL 07 KNEE HIGH BOOTS photo 3/4
SEOUL 07 KNEE HIGH BOOTS photo 4/4
Official product page ↗

SEOUL 07 KNEE HIGH BOOTS

₩428,000
Cueren 쿠에른CU-10

These are lace-up boots that adjust circumference with laces and a buckle strap, and open and close with a long inner zipper. They feature a 3cm heel and a TPR material outsole, and include a removable leather insole. They are good to wear in everyday life while stably wrapping around the foot.

  1. Inner long zipper and buckle strap

    A long zipper is placed on the inside, making it easy to put on and take off without untying the laces each time, and circumference can be adjusted with the ankle buckle strap.

  2. 3cm heel and TPR outsole

    Applying a 3cm-high heel and an outsole made of TPR material helps ensure a stable stride in daily life.

  3. Removable leather insole

    By applying a removable insole made of leather material, it is easy to remove and care for when needed.

PRAGUE 11 LACE UP BOOTS photo 1/4
PRAGUE 11 LACE UP BOOTS photo 2/4
PRAGUE 11 LACE UP BOOTS photo 3/4
PRAGUE 11 LACE UP BOOTS photo 4/4
Official product page ↗

PRAGUE 11 LACE UP BOOTS

₩273,000