Can I attach it directly to the phone case I am currently using, or are there specific cases I should avoid?
Because the shape and material vary for each case, it is difficult to judge whether the strap will fit the product one owns. This question aims to check the criteria for suitable cases to use and cases to avoid.
It attaches stably to rigid silicone or hard cases, but it cannot be used on top-and-bottom separable assembly cases or bumper cases with open backs.
When putting on the strap, the parts you check first are the inner surface of the case and the camera hole. The High Loop of the FEATHERDOWN 페더다운 폰스트랩 is processed to increase durability and reduce surface contamination, giving it a thicker feel than regular ribbon straps[1]. It engages most stably without looseness when attached to hard cases with rigid borders and plates, or silicone cases with good adhesion[2].
On the other hand, there are also cases that cannot be used due to their structure. Assembly cases that split into top and bottom, or bumper cases that only have borders without a back plate, cannot have it attached because there is no surface to fix the strap[3]. Among cases that hold cards on the exterior, types other than the side-insertion method cannot be used together[4]. In particular, since it is difficult for a thick strap to come out of cases with a camera hole diameter of 13mm or less[5][6], it is recommended to measure the hole width with a ruler first before attaching. Cases that are stretched from prolonged use or have broken corners should also be avoided[7].
It has not yet been confirmed whether it can also be attached to cases with textured surfaces such as leather or fabric.
Product measurements
View details
페더다운 폰스트랩
Other stated figures
| Part | Value |
|---|---|
| 지름 | 13mm |