This jacket is woven with a tubing structure on the front and back of the body so that the filling does not escape to the outside. Two types of PrimaLoft filling are divided into different zoned sections, and 2-way zippers are installed at the hem. It is good to wear for outdoor activities where you block the wind and move lightly in chilly weather.
01 / 04
Why this product
We paid attention to the woven structure that prevents filling from leaking out of the fabric and the insulation design tailored to its purpose.
Tubing structure reducing filling leakage
The front and back panels of the body are woven in a tubing structure to reduce filling leaking through needle holes.
Two types of PrimaLoft filling
Warmth is maintained by putting ThermoPlume Plus into the tube panels and dividing Gold Active Plus across the other areas.
2-way zippers on both sides of the hem
By placing 2-way zippers on both sides of the rear hem, you can adjust the lower opening and ventilation to match your range of motion.
Official product information
View details
Measurements
| Part | XS | S | M | L | XL |
|---|---|---|---|---|---|
| Length | 60cm | 61.5cm | 66cm | 68cm | 70cm |
| Sleeve | 71.5cm | 73cm | 77cm | 78.5cm | 80cm |
| Chest ◦ | 45cm | 47.5cm | 53cm | 55cm | 57cm |
For rows marked with ◦, flat measurement or circumference could not be confirmed in official sources, so hmmm determined them using figures from the same item.
Other stated figures
| Part | XS | S | M | L | XL |
|---|---|---|---|---|---|
| Hem ◦ | 46cm | 48.5cm | 51cm | 53cm | 55cm |
For rows marked with ◦, flat measurement or circumference could not be confirmed in official sources, so hmmm determined them using figures from the same item.